16 Setting Up Your 2000i
4. Connect standard red and white RCA stereo audio cables (not provided) from the RCA Audio
(or Audio OUT) outputs on the VCR to the two Auxiliary Audio IN jacks on the rear of the
2000i. Keep your right and left channel connections correct for stereo sound.
NOTE: You can’t connect the audio cables from both a VCR and a DVD player to the
Connection Panel. The panel can accommodate only one external audio source at a time.
However, you can link the DVD player and VCR audio connections as described on page 18.
5. Connect the power cable to an available outlet or power bar (not supplied).
6. Turn on the projector.
7. Press the VCR/DVD Player button on the control panel.
8. Turn on the VCR and press the Play button.
1. Turn off the projector.
2. Connect an S-video cable (not provided) to the S-video OUT port on the DVD player.
To connect a DVD player to the 2000i (S-video connection)
Computer 2
Audio
Auxiliary
Audio In
Audio
Out
Computer 2
Audio
Auxiliary
Audio In
Audio
Out
Connect red and white RCA
audio cables here
VCR/DVD Player Button
