104
Cannot shoot images with
the flash.
• The mode dial is set to , SET UP or .
• The flash is set to (No flash).
• (Twilight mode), (Fireworks mode) or
(Candle mode) is selected for the Scene
Selection function when shooting still images.
• (Magnifying glass mode), (Landscape
mode), (Snow mode), (Beach mode) or
(high-speed shutter mode) is selected for the
Scene Selection function when shooting still
images.
• The camera is in Multi Burst or Burst mode.
p Set the mode dial to , P, M or SCN (pages 23 and 37).
p Set the flash to “Auto” (No indicator), (Forced flash), or
(Slow synchro) (page 29).
p Select other modes than (Twilight mode), (Fireworks
mode) or (Candle mode) (page 34).
p Set the flash to (Forced flash) (page 29).
p Cancel the Multi Burst or Burst mode.
The macro mode does not
function.
• (Magnifying glass mode), (Twilight
mode), (Landscape mode), (Fireworks
mode) or (Candle mode) is selected for the
Scene Selection function when shooting still
images.
p Select other modes than (Magnifying glass mode),
(Twilight mode), (Landscape mode), (Fireworks mode)
or (Candle mode) (page 34).
You cannot shoot images
in succession.
• The capacity of the “Memory Stick” is full.
• The battery level is low and you can shoot only
one image.
p Delete unnecessary images saved in the “Memory Stick” (pages
42 and 82).
p Install a charged battery pack (page 11).
The eyes of the subject
come out red.
— p Set [Red Eye Reduction] to [On] (page 30).
The date and time are
recorded incorrectly.
• The date and time are not set correctly. p Set the correct date and time (page 17).
The aperture value and
shutter speed flash when
you press and hold the
shutter button halfway
down.
• The exposure is incorrect. p Adjust the exposure (page 55).
Unknown horizontal line
appears on the finder.
• This is due to the structure of the finder. p This is not a malfunction.
Symptom Cause Solution
SL
