105
Troubleshooting
Viewing images
Deleting/editing an image
Symptom Cause Solution
The image cannot be
played back.
• The mode dial is not set to .
• You changed the folder/file name on a computer.
• You cannot play back the image on the camera if
you modify the image on a computer.
• The camera is in USB mode.
p Set the mode dial to (page 38).
p See page 93.
—
p Cancel USB communication (page 88).
The image is coarse right
after being played back.
• The image momentarily becomes rough for
image processing.
p This is not a malfunction.
The images cannot be
played back on a TV.
• The [Video Out] setting for the camera in SET
UP is incorrect.
• The connection is not correct.
p Set [Video Out] to [NTSC] or [PAL] (pages 47 and 118).
p Check the connection (page 40).
The images cannot be
played back on a
computer.
— p See page 106.
Symptom Cause Solution
Your camera cannot
delete an image.
• The image is protected.
• The write-protect switch on the “Memory Stick”
is set to the LOCK position.
p Cancel the protection (page 69).
p Set it to the recording position (page 120).
You have deleted the
image by mistake.
• Once you have deleted an image, you cannot
restore it.
p Protecting the image can prevent accidental erasure (page 69).
p The write-protect switch onr1.1(g)nnote ig8.2(nn8.975(1.1(g))122(nnot)8.8(e ig.02Pu177-8.7(e)-10cm 0.7742 -1.1452 TD0 Tc0 T2.7(.)]TJ/F9 0(0u”125.44 177.915 99.24 )-76.4(a1 177.91rF9 1 Tf-.5([(T)6d)8.4(en)i-401en)i-401en)i-401en)i-401enhe3 Tf0.77jaP622(r T)6 4it6( c)/F2r T
