29
Shooting still images
, Center the subject in the frame.
Press and hold the shutter
button halfway down to focus
on, then press the shutter
button fully down.
The self-timer lamp (page 8) will flash, and
you will hear a beeping sound. The image
will be shot after approximately 10 seconds.
To cancel the self-timer during the
operation
Press V ( ) on the control button again.
The indicator disappears from the LCD
screen.
• If you stand in front of the camera and press the
shutter button, the focus and the exposure may
not be correctly set.
2
60min
VGA
FINE
101
96
F3.530
S
AF
Rotating the lens
– Mirror mode
, Adjust the lens portion angle.
When shooting in mirror mode, turn over
the lens portion as illustrated above. The
image on the LCD screen is a mirror-image.
However, the image can be normal when
recorded.
Image on the
LCD screen
Recorded image
Selecting a flash mode
, Set the mode dial to , and
press v ( ) on the control
button repeatedly to select a
flash mode.
The flash mode has the following features.
No indicator (Auto): The camera decides
to use the flash based on lighting
conditions. The flash will be used when
there is not enough light. The default setting
is Auto.
(Forced flash): The flash will be used
regardless of the amount of ambient light.
(Slow synchro): The flash will be
used regardless of the amount of ambient
light. In this mode, the shutter speed is
slower under dark conditions, so you can
60min
VGA
101
96
S
AF
SL
