85
Troubleshooting
The battery remaining
indicator is incorrect. Or
the sufficient battery
remaining indicator is
displayed but the power
runs out soon.
• You have used the camera for a long time in an
extremely hot or an extremely cold location.
• The battery pack is dead (page 105).
• The battery pack is discharged.
• A mismatch has occurred in the remaining
battery time information.
—
p Replace the battery pack with a new one.
p Replace the battery pack with a charged one (page 11).
p Fully charge the battery pack (page 11).
The battery pack runs
down too quickly.
• You are shooting/viewing images in an
extremely cold location.
• The battery pack is not charged enough.
• The battery pack is dead (page 105).
—
p Fully charge the battery pack (page 11).
p Replace the battery pack with a new one.
The power cannot be
turned on.
• The battery pack is not installed properly.
• The camera is not properly installed to the USB
cradle.
• The AC power adaptor is disconnected.
• The battery pack is dead (page 105).
• The battery pack is not charged enough.
p Properly install the battery pack (page 11).
p Properly install the camera (page 12).
p Connect the AC power adaptor securely to the camera
(page 15).
p Replace the battery pack with a new one.
p Fully charge the battery pack (page 11).
The power turns off
suddenly.
• If you do not operate the camera for about 90
seconds while the power is on, the camera turns
off automatically to prevent wearing down the
battery (when [POWER SAVE] is [OFF], after
three minutes.) (page 16).
• The battery pack is discharged.
• The camera is not properly installed to the USB
cradle.
p Turn on the power again (page 16).
p Replace the battery pack with a charged one (page 11).
p Properly install the camera (page 12).
Symptom Cause Solution
