91
Troubleshooting
Others
Symptom Cause Solution
The camera does not
work, no operations can
be performed.
• You are not using an “InfoLITHIUM” battery
pack.
• The battery level is low or zero (The
indicator appears.).
• The AC power adaptor is not connected
securely.
• The camera is not properly installed to the USB
cradle.
p Use an “InfoLITHIUM” battery pack only (page 105).
p Charge the battery (page 11).
p Connect it securely to the multi connector of the camera and to
a wall outlet (wall socket) (page 15).
p Properly install the camera (page 12).
The power is on, but the
camera does not work.
• The internal system is not working properly. p Disconnect, and then, after one minute, reconnect all power
sources and turn on the camera. If this does not work, press the
RESET button located inside the battery/“Memory Stick” cover
with a pointed object, then turn the power on again. (This will
clear the date and time settings, etc.)
You cannot identify the
indicator on the LCD
screen.
— p Check the indicator (pages 108 to 110).
The lens gets fogged. • Condensation is occurring. p Turn off the camera, leave the camera for about an hour and then
try to use it again (page 103).
The camera gets hot if you
use it for a long time.
— p This is not a malfunction.
