92
Viewing images
The eyes of the subject
come out red.
— p Set [Red Eye Reduction] on the Setup screen to [On] (pages 29
and 106).
The date and time are
recorded incorrectly.
• The date and time are not set correctly. pSet the correct date and time (pages 17 and 107).
The F value and shutter
speed flash when you
press and hold the shutter
button halfway down.
• The exposure is incorrect. p Correct the exposure (page 50).
Symptom Cause Solution
Symptom Cause Solution
Your camera cannot play
back images.
• The mode switch is not set to .
• The folder/file name has been changed on your
computer.
• Your camera cannot play back image files
copied from the hard disk of your computer if the
image has been modified.
• The camera is set to USB mode.
p Set it to (page 35).
p See page 85.
—
p Finish the USB connection (pages 80 and 86).
The image appears rough
right after playback starts.
• The image may appear rough right after
playback starts due to the image processing.
p This is not a malfunction.
The image does not
appear on the TV screen.
• The video output signal setting of your camera
on the Setup screen is incorrect.
• The connection is not correct.
• The USB jack is connected.
p Change the setting (pages 44 and 107).
p Check the connection (page 37).
p Follow the procedure of the note P on page 80 (Windows) or
1 on page 86 (Macintosh) and disconnect the USB cable.
The image cannot be
played back on a
computer.
— p See page 93.
