254
English
Warning indicators
101-0001 Warning indicator pertaining to
files
Slow flashing:
•The file is corrupted.
•The file is unreadable.
•You are trying to carry out MEMORY MIX on
a moving picture (p. 152).
C:21:00 Self-diagnosis display (p. 253)
E The battery pack is dead or nearly dead
Slow flashing:
•The battery pack is nearly dead.
Depending on the operating conditions,
environmental or battery conditions, the E
indicator may flash, even if there are
approximately five to 10 minutes remaining.
% Moisture condensation has occurred *
Fast flashing:
•Eject the cassette, set the POWER switch to
OFF (CHG), and leave it for about one hour
with the cassette lid open (p. 279).
Warning indicator pertaining to Cassette
Memory *
Slow flashing:
•No cassette with Cassette Memory is inserted
(p. 269).
Warning indicator
pertaining
to the
“Memory Stick”
Slow flashing:
•No “Memory Stick” is inserted.
Fast flashing:
•The image cannot be recorded on the
“Memory Stick.”*
Warning indicator pertaining to the
“Memory Stick” formatting*
Fast flashing:
•The “Memory Stick” data is corrupted
(p. 134).
•The “Memory Stick” is not formatted
correctly (p. 229).
If indicators appear on the screen, check the following:
See the page in parentheses “( )” for details.
Warning indicator pertaining to
incompatible “Memory Stick”*
Slow flashing:
•An incompatible “Memory Stick” is inserted.
Q Warning indicator pertaining to the tape
Slow flashing:
•The tape is near the end.
•No cassette is inserted.*
•The write-protect tab of the cassette is set to
SAVE > (p. 272).*
Fast flashing:
•The tape has run out.*
Z You need to eject the cassette*
Slow flashing:
•The write-protect tab on the cassette is set to
SAVE > (p. 272).
Fast flashing:
•Moisture condensation has occurred
(p. 279).
•The tape has run out.
•The self-diagnosis display code is displayed
(p. 253).
- The image is protected*
Slow flashing:
•The image is protected (p. 179).
Warning indicator pertaining to the flash
Slow flashing:
•During charging
Fast flashing:
•The self-diagnosis display code is displayed
(p. 253).*
•There is something wrong with the built-in
flash or the external flash (optional).
Warning indicator pertaining to still
image recording
Slow flashing:
•The still image cannot be recorded on the
“Memory Stick” in the current operating
conditions (p. 62).
* You hear the melody or beep sound.
