14 Phaser 850 Color Printer
TCP/IP Configuration Overview
TCP/IP Configuration Overview
Setting the printer’s IP address
The Tektronix Installer for Windows automatically sets the printer’s IP address under the
following conditions:
■ The printer has a network connection.
■ TCP/IP is installed on the computer.
■ The IP address has not already been assigned (for example, from the front panel or by
DHCP).
During the installation process, you can accept the automatically assigned address or
assign a different one.
The Tektronix installer for Windows is the recommended method for setting IP address in
Windows environments; for other environments, see Setting the Printer’s IP Address on
page 22.
Host (computer) configuration
Refer to the topic for your environment:
■ Windows 95 and Windows 98: PhaserPort Software on page 15.
■ Windows NT on page 18.
■ TCP/IP for Macintosh on page 20.
■ For TCP/IP Unix Host configuration, see the PhaserShare Networking Manual.
■ For TCP/IP configuration for OS/2 Warp and LAN Server, see the PhaserShare
Networking Manual.
Printing the Configuration Page
Your printer’s Configuration Page reports important information that you will need for
TCP/IP configuration. For information on printing a Configuration Page, see The printer’s
Configuration Page on page 2.
