A SERVICE OF

logo

Connecting Your Printer to a Network
2
Setup Guide
7
PhaserShare Series B Ethernet card
The PhaserShare Series B Ethernet card has the following connections and
indicators:
1.
TX indicator (yellow); blinks while the network interface is
transmitting.
2.
RX Link indicator (green); blinks while the network interface is
receiving.
3.
Speed indicator (yellow); on indicates 100 Mbps; off indicates
10 Mbps.
4.
Twisted pair connection indicator; on indicates a working connection
to a hub; off indicates no connection to a hub. If the 10Base2 connector
(
6
) is used, this indicator is off.
5.
Twisted pair (10BaseT or 100BaseTx) connector.
6.
Thin coax (10Base2) connector.
9789-05
13 5 6
24
100
Mbs
10/100Base-TX
10Base2
TP
LINK
TX
RX
PhaserShare
TM
Series B
Ethernet Card