Windows NT
7
Setup Guide
43
Adding a Windows NT 3.x driver
This update procedure provides printer page size information for Windows NT
applications. However, TekColor color corrections and other PostScript Level 2
features are not supported by the Windows NT driver. Refer to your printer’s
user documentation for instructions on other ways of selecting color corrections.
Refer to your Microsoft Windows NT documentation for details on features in
the Windows NT driver.
These instructions assume a basic familiarity with Windows NT operation and
terminology. For additional information about Windows NT, refer to your
Microsoft Windows NT documentation.
1.
Start your system with Windows NT.
2.
From the Main window, double-click the Print Manager icon.
3.
Install the Tektronix printer. From the Printer menu, select Create
Printer; the Create Printer dialog box appears.
4.
Under Driver, scroll to the end of the list and select Other; the Install
Driver dialog box appears.
5.
When prompted, do one of the following.
■ If you are using the printer’s CD-ROM: Type the CD-ROM drive
location. Click OK; the Select Driver dialog box appears.
■ If you are using the printer’s software for Windows diskette:
Type the diskette drive location. Click OK; the Select Driver
dialog box appears.
6.
Under Printer Driver, choose your printer from the list, then click OK.
7.
Under Print to, scroll to the end of the list and select Other; the Printer
port dialog box appears. Tektronix printers support two types of
network ports in Windows NT: LPR and AppleTalk. The next topic
covers LPR ports; for information on creating an AppleTalk port, see
“Creating an AppleTalk port” on page 45.
N
O
T
E
If you are using older drivers, you get a series of Noncritical Errors stating
that Windows NT is unable to open the
PSCRIPT.DLL
file and the
PSCRIPT.DRV
files. Click Ignore or update your driver.
