A SERVICE OF

logo

Open as PDF
next previous
TD-W8960N Wireless N ADSL2+ Modem Router User Guide
Figure 4-14
8. On the next screen you will see the WAN Port Information Table with the new configuration.
Figure 4-15
¾ Remove: Select the check box in the table above and then click Remove, the corresponding
interface will be deleted in the table.
¾ Add: Click the Add button, and you can add a new interface in the next screen.
4.4.2.2 ATM-EoA-IPoE
If your ISP provides an IPoE connection and you need to use an ATM Interface, follow the steps
below to add a WAN service over a selected ATM interface:
1. Add a new ATM interface and select EoA option for DSL Link Type (4.4.1.1
ATM interfaces).
23