A SERVICE OF

logo

Open as PDF
next previous
OVEN LIGHT SWITCH OVEN SELECTOR
SURFACE UNIT INDICATORS
Using the surface units
Surface Unit Indicators
The solid dot in the surface unit
indicator shows which surface unit
is turned on by that knob.
Signal Light
Control knobs must
be
pushed in
before turning
them to a setting. They
can be set anywhere between HI
and OFF.
One of the signal lights will glow
when a surface unit is on.
Until you get used to the settings, use the following as a guide.
For best results,
start cooking at the high settings; then turn the control knob down to continue
cooking. -
Use
HI to start
Use MED-HI
Use MED
Use MED-LO
foods cook- to hold a
for gravy,
to keep food
ing; to bring rapid boil; to
puddings
cooking after
liquids to a fry chicken
and icing; to starting it
boil.
or pancakes.
cook large on a higher
amounts of setting.
veaetables.
CAUTION: The use of the
HI
sefflng for long periods of time
can damage surface units and
discolor
ohrome reflector
bowls. Start cooklng on HI and turn control down to con-
tfnue cooklng.
Use LO
to
keep food
warm until
ready to
serve. Set the
heat higher
or lower
I
within the LO
band to keep
food at the
temperature
you want.
5