Xerox 4112/4127 Copier/Printer User Guide
8-16
8. Paper and other Media
Change/Confirm the Tray Settings
If you change paper types, the tray settings must be modified to
reflect the paper type that is loaded in the tray. The following
describes how to change or confirm the attributes of the paper
loaded in the trays.
Change/confirm the tray settings from the All Services screen
NOTE: User Interface (UI) screens vary from system to system
and from marketplace to marketplace. As a result, the UI screens
shown in this section may or may not reflect your system
configuration.
You can confirm and/or change the paper settings, such as
weight, size, type, etc.
KEY POINT: In order for the user to confirm or change paper
settings, the System Administrator must enable the Paper Tray
Attributes feature. See your System Administrator, or refer to the
System Administration Guide, Chapter 8, “Setup Menu.”
1. Press the Machine Status button on the Controller.
2. From the Machine Status menu, select the:
a. Tools tab.
b. Paper Tray Attributes button.
