Problems during Copying
Xerox 6204 Wide Format Solution 189
Problem Solving
10
Black lines are
printed.
Is the scanning area dirty? Clean the platen glass.
Refer to "Cleaning the Machine" (P.181).
Internal components are
dirty.
Contact your Xerox Customer Support
Center.
White dots
appear in black
filled areas.
Is the correct type of media
used?
Correctly load the appropriate media.
Refer to "Loading Media" (P.37).
Internal components are
dirty.
Contact your Xerox Customer Support
Center.
Toner smudges
when rubbed
with your finger.
Toner is not
fused to the
paper.
The paper is
dirtied with toner.
Is the media damp? Replace with new media.
Refer to "Loading Media" (P.37).
Is the correct type of media
used?
Correctly load the appropriate media.
Refer to "Loading Media" (P.37).
Are the media settings
correct?
Correctly select the media settings.
Refer to "Media Settings" (P.42).
The entire paper
area is printed
black.
A probable cause is some
type of internal machine
error.
Contact your Xerox Customer Support
Center.
Symptoms Check Remedy
