Effects Parameters 233
02R96—Owner’s Manual
AMP SIMULATE
One input, two output guitar amp simulator.
DYNA. FILTER
Two input, two output dynamically controlled filter.
Parameter Range Description
AMP TYPE
1
1. STK-M1, STK-M2, THRASH, MIDBST, CMB-PG, CMB-VR, CMB-DX, CMB-TW, MINI, FLAT
Guitar amp simulation type
DST TYPE
DST1, DST2, OVD1,
OVD2, CRUNCH
Distortion type (DST = distortion, OVD = overdrive)
DRIVE
0–100 Distortion drive
MASTER
0–100 Master volume
BASS
0–100 Bass tone control
MIDDLE
0–100 Middle tone control
TREBLE
0–100 High tone control
CAB DEP
0–100% Speaker cabinet simulation depth
EQ F
99–8.0 kHz Parametric equalizer frequency
EQ G
–12 to +12 dB Parametric equalizer gain
EQ Q
10.0–0.10 Parametric equalizer bandwidth
N. GATE
0–20 Noise reduction
Parameter Range Description
SOURCE
INPUT, MIDI Control source: input signal or MIDI Note On velocity
SENSE
0–100 Sensitivity
DIR.
UP, DOWN Upward or downward frequency change
DECAY
1
1. 6.0 ms–46.0 s (fs=44.1 kHz), 5.0 ms–42.3 s (fs=48 kHz), 3 ms–23.0 s (fs=88.2 kHz), 3 ms–21.1 s
(fs=96 kHz)
Filter frequency change decay speed
TYPE
LPF, HPF, BPF Filter type
OFFSET
0–100 Filter frequency offset
RESO.
0–20 Filter resonance
LEVEL
0–100 Output Level
