Filter
Top Products
10-EN
An iPhone/iPod can be connected to this unit by using the Interface
cable for iPod (supplied). When this unit is connected by using the
cable, the controls on the iPod are not functional.
• Internet and telephone functions of iTouch or iPhone, ect., can also
be used when connecting to the unit. However, using these functions
will stop or pause the playing songs, at this time do not operate the
unit to avoid a malfunction.
• If you connect an iPhone to this unit, it can be used as an iPod. If you
use iPhone as a hands-free phone, you need the optional Bluetooth
INTERFACE (KCE-400BT).
About iPhones/iPods usable with this unit
• The unit can be used with the fifth generation and above
iPod, iPhone 3G, iPhone, iPod touch, iPod classic, the first
generation iPod nano, the second generation iPod nano or
the third generation iPod nano only. iPod Shuffle cannot be
used, however.
• Touch wheel or scroll wheel type iPods without the dock
connector cannot be connected to the unit.
• The unit can be used with the following iPhones/iPods.
iPhone 3G (version 2.0)
iPhone (version 1.1.4)
iPod touch (version 1.0.4)
iPod classic (version 1.1.1)
iPod nano (3rd generation) (version 1.1)
iPod nano (2nd generation) (version 1.1.3)
iPod with video (version 1.2.3)
iPod nano (1st generation) (version 1.3.1)
• For clarity in identifying your model of iPod, please see
Apple’s own document “Identifying iPod models” at
http://support.apple.com/kb/HT1353
• This unit does not support iPhone/iPod’s video playback
function, even using a video-compatible cable.
• If the unit is used with versions of iTunes earlier than 7.6,
correct function and performance are not guaranteed.
Playback
1
Press SOURCE to switch to the USB IPOD mode.
2
Press or to select the desired song.
3
To pause playback, press / .
Pressing / again will resume playback.
• If a song is playing on the iPhone/iPod when it is connected to this
unit, it will continue playing after the connection.
• An episode or audiobook may have several chapters, the chapter can
be changed by pressing
or .
Searching for a desired Song/Title
An iPhone/iPod can contain hundreds of songs. By keeping these songs
organized in playlists, this unit can use these to ease song searches.
Using the Playlist/Artist/Album/Podcast/Audiobook/Genre/Composer/
Song search mode’s individual hierarchy, you can narrow down your
search as shown in the table below.
• You can select your preferred search mode. Refer to “iPod Search
Mode Setting” (page 23).
For example: Searching by Artist name
The following example explains how an ARTISTS search is
performed. Another search mode can be used for the same
operation, although the hierarchy differs.
1
Press /ENTER to activate the Menu Select mode.
2
Turn the Double Action encoder to select the
ARTISTS, and then press
/ENTER.
The artist search mode is activated and artists names are
displayed.
3
Turn the Double Action encoder to select the
desired Artist, and then press
/ENTER.
The album search mode is activated and albums names are
displayed.
iPhone/iPod
(Optional)
FUNCTION/SETUP
SOURCE
/
/ENTER
Double Action encoder
VIEW
Return to the beginning of the current song:
Press .
Fast backward through current song:
Press and hold .
Advance to the beginning of the next song:
Press .
Fast forward through current song:
Press and hold .
Hierarchy 1 Hierarchy 2 Hierarchy 3 Hierarchy 4
PLAYLISTS SONG — —
ARTISTS* ALBUM* SONG —
ALBUMS* SONG — —
PODCASTS EPISODE — —
AUDIOBOOKS — — —
GENRES* ARTIST* ALBUM* SONG
COMPOSERS* ALBUM* SONG —
SONGS — — —