Filter
Top Products
20-EN
2
Turn the Double Action encoder to select the HPF
Adjustment mode, and then press
/ENTER.
SUBW SUBW SYSTEM* BASS TREBLE HPF
SUBW
* Displayed only when subwoofer is ON.
3
Turn the Double Action encoder to select the
desired HPF frequency, and then press
/ENTER.
OFF 80 (Hz) 120 (Hz) 160 (Hz)
4
Press to return to normal mode.
• If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
• If is pressed during setting, the unit returns to the previous item.
• The function is inoperable when DEFEAT is set to ON.
Operating the External Audio Processor
You can call up the preset memory of the external audio processor from
this unit.
1
Press and hold PRESET for at least 2 seconds to
call the external audio processor mode when the
external audio processor is connected.
The AP Preset screen is displayed.
2
Turn the Double Action encoder to select the
preset number, and press
/ENTER.
• For the operation of external audio processor, refer to the Owner’s
Manual of the external audio processor you purchased.
Use the SETUP menu to flexibly customize the unit to suit your own
preferences and usage. Choose settings from GENERAL, DISPLAY,
etc., to make the desired changes.
1
Press and hold FUNCTION/SETUP for at least 2
seconds to activate the SETUP selection mode.
2
Turn the Double Action encoder to select the
desired item, and then press
/ENTER.
BT*
1
AUDIO
*
2
GENERAL DISPLAY IPOD
TUNER*
3
BT
(e.g. Select GENERAL)
*
1
Displayed only when INT MUTE is set to OFF, and the mode is set to
other than BT AUDIO.
*
2
Displayed only when an external audio processor is connected. For
details, refer to the Owner’s Manual of the external audio processor.
*
3
Only when HD / SAT receiver is connected.
3
Turn the Double Action encoder to select a
setting item, and then press
/ENTER.
(e.g. Select POWER IC)
BT:
BT IN
AUDIO*
4
:
USER PRESET
*
5
MX
*
5
SUBW
*
5
MX LEVEL
*
6
USER PRESET
*
5
GENERAL:
CALENDAR CALENDAR ADJ
*
7
CLK MODE
CLK ADJ
*
8
PLAY MODE BEEP INT MUTE
*
9
AUX+ AUX+ NAME
*
10
AUX AUX NAME
*
10
CHANGER NAME DIGITAL AUX D-AUX NAME
*
11
AUX IN GAIN
*
12
POWER IC DEMO CALENDAR
SETUP
Follow steps 1 to 5 to choose an item to change. See the
item descriptions following Step 5 for further details.
Double Action encoder
FUNCTION/SETUP
BAND /ENTER
SOURCE