Alpine 68-21627Z13-A Car Stereo System User Manual


 
26-EN
Playing MP3 Files from Flash Memory
(optional)
If you connect a Flash Memory Device containing MP3, MP3 files can
be played back.
1
Press SOURCE to switch to the USB AUDIO mode.
2
To pause playback, press .
Pressing again will resume the playback.
Notes
The root folder is displayed as “ROOT” in the Folder Name Search
mode.
This unit plays back files in Flash Memory with the same controls and
modes as playback of CDs containing MP3. For details, refer to “CD/
MP3” on page 10.
Before disconnecting Flash Memory, be sure to change to another source
or set to pause.
The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
Flash Memory Connection (optional)
1
Open the cover of the USB Port.
2
Connect the Flash Memory directly to the USB Port, or via
the USB cable.
1
Carefully, pull out the Flash Memory Device from the USB
cable or the USB Port.
2
Close the cover of the USB Port.
Notes
Change to a source other than the Flash Memory mode, and then
remove the Flash Memory Device. If Flash Memory is removed in the
Flash Memory mode, data may be damaged.
When removing Flash Memory, pull it out straight.
If sound is not output or Flash Memory is not recognized even when
connected, remove the Flash Memory Device once, and then connect it
again.
Route the USB cable away from other cables, etc.
After removing the Flash Memory, close the cover of the USB Port to
prevent dust or foreign objects from entering and causing a
malfunction.
About MP3 File of Flash Memory
Playing back MP3
MP3 files are prepared, and then stored to a Flash Memory Device. This
unit can recognize at most 100 folders and 100 files per folder stored in
Flash Memory. Playback may not be performed if a Flash Memory
Device exceeds the limitations described above.
Do not make a file’s playback time more than 1 hour.
Media supported
This device can play back Flash Memory.
Corresponding File Systems
This device supports FAT 12/16/32 for Flash Memory device.
Flash Memory (optional)
Connect Flash Memory
SOURCE/
USB Connection TerminalThis unit
Flash Memory
(sold separately)
or
Flash Memory
(sold separately)
Cable (sold
separately)
Remove Flash Memory