Alpine DVA-5205P Car Stereo System User Manual


 
40
Operating the
digital audio
processor (optional)
When used with a digital audio processor (PXA-
H510), operation is possible from the remote
control unit included with the DVA-5205P. Also
refer to the PXA-H510’s operating instructions.
DVD
CD
Video CD
During playback,
press “A.PROC”.
The setting menu appears.
Use the “Joystick” to
make the selection, then
press “ENT”.
For the procedure after
making a selection, refer
to the pages indicated on
the table below.
PARAMETRIC-
EQ
SURROUND
PRIVATE-
MEMORY
TIME-
CORRECTION
DOLBY
SURROUND
MODE
ADJUST
MODE
Adjust the parametric equalizer’s band frequency,
band width and level.
Select one of six surround modes according to the
music source using DSP (digital signal processing).
Store and recall up to six parametric equalizer
adjustments and settings.
Eliminate time delays resulting from the distance
between the listening position and the speakers.
Switch between the Dolby Digital input and the Pro
Logic input.
Adjust the speaker mode, speaker level, etc.
Adjust the volume, fader, balance, etc.
See
page
P41
P42
P43
P45
P45
P46
P53
Item Description
Operating the digital audio processor (optional)