Alpine KTP-445U Car Stereo System User Manual


 
ENGLISH
Introduction:
Please read this OWNER·s MANUAL thoroughly to familiarize yourself with each control and function.
We
at
ALPINE hope that your new KTP-445U will give you many years of listening enjoyment.
In
case of problems when installing your KTP-445U, please contact your authorized ALPINE dealer.
CAUTION:
These
controls
are
for
tuning
your
system. Please
consult
your
authorized
Dealer
for
adjustment.
~WARNING
This symbol means important instructions.
Failure to heed them can result
in
serious injury or death.
~CAUTION
This symbol means important instructions.
Failure to heed them can result
in
injury or property damages.
~WARNING
DO NOT OPERATE
ANY
FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING
YOUR VEHICLE. Any function that requires your prolonged attention should only be performed after coming to a
complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in
an accident.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISES WHILE DRIVING.
Excessive volume levels that obscure sounds such as emergency vehicle sirens
or
road warning signals (train crossings,
etc.) can be dangerous and may result in an accident. LISTENING
AT
LOUD VOLUME LEVELS IN A CAR MAY ALSO
CAUSE HEARING DAMAGE.
DO NOT DISASSEMBLE OR ALTER. Doing so may result
in
an accident, fire or e.lectric shock.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS. Use for other than its designed application may
result
in
fire, electric shock or other injury.
USE THE CORRECT AMPERE RATING WHEN REPLACING' FUSES. Failure to do so may result
in
fire or
electric shock.
DO NOT
BLOCK
VENTS OR RADIATOR PANELS. Doing so may cause heat to build up inside and may result
in
fire.
MAKE
THE CORRECT CONNECTIONS. Failure to make the proper connections may result
in
fire or product
damage.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (Check with your dealer if you are not sure.)
Failure to do so may result
in
fire, etc.
BEFORE WIRING, DISCONNECT
THE
CABLE
FROM THE NEGATIVE BATTERY TERMINAL. Failure to do so
may result
in
electric shock or injury due to electrical shorts.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS. Arrange wiring and
cables
in
compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or
hang up on places such as the steering wheel, gear lever, brake pedals, etc. can be extremely hazardous.
• DO NOT SPLICE INTO ELECTRICAL CABLES. Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity of the wire and result
in
fire or electric shock.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES. When drilling holes
in
the chassis for
installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring.
Failure to take such precautions may result
in
fire.
DO NOT USE BOLTS OR NUTS IN THE
BRAKE
OR STEERING SYSTEMS TO
MAKE
GROUND
CONNECTIONS. Bolts or nuts used for the brake or steering systems (or any other safety-related system), or
tanks should NEVER be used for installations or ground connections. Using such parts could disable control of
the vehicle and cause fire etc.
KEEP
SMALL
OBJECTS SUCH AS BOLTS OR SCREWS OUT OF THE REACH OF CHILDREN. Swallowing
them may result
in
serious injury. If swallowed, consult a physician immediately.