Alpine PKG-RSE2 Car Video System User Manual


 
14-EN
Chapter/Track/Title Repeat Playback
Use this function to play the disc’s titles, chapters or tracks repeatedly.
During playback, press REPEAT.
The repeat mode switches each time the button is pressed.
DVD
REPEAT CHAPTER
REPEAT TITLE
REPEAT OFF
The chapter is played repeatedly.
The title is played repeatedly.
The mode returns to normal
playback. (Factory default)
VIDEO CD
The track is played repeatedly.
The entire disc is played repeatedly
.
(Factory default)
REPEAT TRACK
REPEAT DISC
The track/disc repeat modes cannot be used on video CDs with
playback control (PBC). Set VCD PLAY MODE to turn the PBC
function off. Refer to “Setting the video CD Play Mode” (page 23).
For some discs it is not possible to switch the repeat mode.
Switching the Audio Tracks
DVDs can have up to 8 different audio tracks. These alternate tracks
can be switched during playback.
During playback, press AUDIO.
The sound switches between the alternate audio tracks recorded
on the disc each time the button is pressed.
The selected alternate track becomes the default setting every time
the power is turned on or the disc is replaced. If the disc does not
include that track, the disc's default language is selected instead.
Not all discs will allow changing the alternate audio tracks during
playback. In these cases, select audio tracks from the DVDs menu.
There may be a delay before the selected alternate track begins to
play.
Video CDs with multiplex audio
During playback, press AUDIO.
The left and right channels will be output as shown in the fi gure
below, each time the button is pressed.
LR LL RR LR
Switching the Angle (DVD only)
On DVDs in which scenes have been fi lmed from multiple angles, the
angle can be switched during playback.
During playback, press ANGLE.
The angle switches between the angles recorded on the disc,
each time the button is pressed.
Some time may be required for the angle to change.
Depending on the disc, the angle may switch in one of two ways.
- Seamless: The angle switches smoothly.
- Non-seamless: When the angle is switched, a still picture is
displayed fi rst, after which the angle switches.
Switching the Subtitles (subtitle language)
(DVD only)
With multiple subtitle language DVDs, the subtitle language can be
switched during playback, or subtitles can be hidden.
During playback, press SUBTITLE.
The subtitle switches between the languages recorded on the
disc and OFF each time the button is pressed.
There may be a delay before the selected subtitle appears.
No all discs will allow changing the subtitles during playback. In
these cases, select subtitles from the DVD's menu.
The selected subtitle language becomes the default setting every
time the power is turned on or the disc is replaced. If the disc does
not include that language, the disc's default language is selected
instead.
For some discs, the subtitles will be displayed even when this is set
to off.
Tips
Switching from the disc menu.
For some discs, the audio language, angle and subtitles can
be switched from the disc menu.
1 Press
MENU
, select the item, then press
ENT
.
2 Press
, , or
to select the language or angle,
the press
ENTER
.
(For some discs, they can be selected using the
number keys
"0" to "9" while the language or the
angle menu is displayed.)
Book_PKG-RSE2.indb 14Book_PKG-RSE2.indb 14 4/8/06 2:17:19 AM4/8/06 2:17:19 AM