Alpine PKG-RSE2 Car Video System User Manual


 
33-EN
System Indication
DISC ERROR
Mechanism error.
1) Press and eject the disc.
If the disc does not eject, press and hold for at least 3
seconds and eject the disc.
If the disc still does not eject, consult your Alpine dealer.
2) When the error indication remains after ejecting, press
again.
If the error indication still does not turn off after pressing
a few times, consult your Alpine dealer.
The temperature in the car is too low.
- Raise the temperature in the car to normal temperature.
NO DISC
No disc is inserted.
- Insert a disc.
Although a disc is inserted, "NO DISC" is displayed and the
unit does not start to play or eject the disc.
- To remove the disc, press and hold for at least 3 seconds.
Remote control operation is not possible.
- For some discs or playing modes, certain operations are not
possible. This is not a malfunction.
REGIONAL CODE
VIOLATION
Disc does not match regional code number.
- Load a disc that matches the regional code number.
HI-TEMP
Protective circuit is activated at high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
- Leave the power OFF until the temperature decreases and
then turn the power ON again.
LOADING ERROR
EJECT ERROR
Mechanism error.
1) Press and eject the disc.
If the disc does not eject, press and hold for at least 3
seconds and eject the disc.
If the disc still does not eject, consult your Alpine dealer.
2) When the error indication remains after ejecting, press
again.
If the error indication still does not turn off after pressing
a few times, consult your Alpine dealer.
VIDEO SIGNAL SYSTEM IS
NOT CORRECT
PAL disc is loaded.
- Load an NTSC disc.
Book_PKG-RSE2.indb 33Book_PKG-RSE2.indb 33 4/8/06 2:17:49 AM4/8/06 2:17:49 AM