Alpine TDM-7546E Car Stereo System User Manual


 
11
English
Radio Operation
Automatic Seek Tuning
Press the SOURCE button until radio frequency
appears in the display.
TAPE
90.1
SOURCE
F 1 90.1
F 1
F 2
AM
Press the TUNE button to illuminate the DX
indicator in the display. With the DX mode
activated, both strong and weak stations will be
tuned in the Auto-Seek operation.
Press again to return to the local mode. The DX
indicator will turn off and only strong radio
stations will be tuned.
Press and release the DN or UP button to
automatically seek a station downward or
upward respectively.
Note: The ST indicator appears in the display
whenever a Stereo FM station is tuned.
As the stereo FM signal weakens, the
unit gradually changes mode from
stereo to monaural to reduce noise.
Should the level drop low enough to
completely make the signal monaural,
the ST indicator will turn off. When the
signal becomes strong enough, the unit
automatically switches back to the
stereo mode.
ST
Press the BAND button repeatedly until the
desired radio band is displayed.
BAND
PROG
TUNE
UP
DN
1
2
DX SEEK
DX SEEK
3
4