Filter
Top Products
FR
ES
DE
SE
IT
9-EN
Adjusting the Lowest Level of the
Backlight
The minimum brightness level for the
backlighting (LOW) is adjustable. This is used to
match the screen brightness to the dashboard
(especially at night). This setting is recalled
whenever the vehicle’s headlight switch is turned
on in the AUTO Dimmer mode.
1 Press the SETUP button.
2 Press the or button within 10 seconds and
select DIMMER Lv.
3 Press the or button within 10 seconds to set
the value.
4 Press the SETUP button to finish adjustments.
SET UP
AUX1
DIMMER AUTO
DIMMER Lv. -
AT CLOSE
OFF
LOW HIGH
PAGE 2
Setting Automatic Closing of
Monitor
Simply turn the ignition key to OFF to
automatically close the monitor display.
1 Press the SETUP button.
2 Press the or button within 10 seconds to
select AT CLOSE.
3 Press the or button within 10 seconds to set
the value.
AUTO:
Automatic closing of the display in depending upon
whether the ignition switch is ON or OFF.
If you press the POWER button or the OPEN/
CLOSE button while the monitor is being opened or
closed, the monitor stops opening or closing, even if
AUTO setting is on, and cannot be closed
automatically.
In this case, press the POWER button or the OPEN/
CLOSE button again to close the monitor.
OFF:
Manual closing of the display.
4 Press the SETUP button to finish adjustments.
SET UP
AUX1
DIMMER AUTO
DIMMER Lv. -
AT CLOSE
OFF
AUTO
OFF
PAGE 2