Filter
Top Products
11-EN
01GB05VPAB222R.fm
ALPINE VPA-B222R 68-02065Z87-A (EN)
Adjusting the Audio
The following steps 1 to 5 are common operations of each audio
adjustment. Refer to each section for details.
1
Press and hold TA/RTN/SETUP for at least 2
seconds.
The SETUP screen is displayed.
2
Press the joystick up or down to select AUDIO
MODE, then press the joystick right.
The AUDIO MODE screen is displayed.
Display Example for AUDIO MODE Screen
3
Press the joystick up or down to select the desired
item.
* Setting can be made only when an external audio processor is
connected.
4
Press the joystick left or right to adjust and set the
desired item.
5
Press TA/RTN/SETUP to return to the previous
screen. Press TA/RTN/SETUP repeatedly to return
to the main source screen displayed before starting
the setup operation.
Adjust the sound volume of the left and right speakers.
Setting item: BALANCE
Setting range: L15 to R15
Adjust the volume of the front and rear speakers.
Setting item: FADER
Setting range: F15 to R15
You can change the Treble Frequency emphasis to create your own tonal
preference.
1
Select TREBLE on the AUDIO MODE screen, then
press the joystick right.
2
Press the joystick up or down to select the desired
item, then press the joystick left or right to adjust
and set the desired item.
Setting the treble level
You can boost or cut treble frequencies.
(The level of each audio source can be adjusted.)
Setting item: LEVEL
Setting level: -7 to +7
Setting the treble centre frequency
The displayed treble frequency is boosted.
(Common to each audio source.)
• Adjustment cannot be performed when an external audio processor is
connected and DEFEAT is set to ON.
You can change the Bass Frequency emphasis to create your own tonal
preference.
1
Select BASS on the AUDIO MODE screen, then
press the joystick right.
2
Press the joystick up or down to select the desired
item, then press the joystick left or right to adjust
and set the desired item.
Other Useful
Features
Setting items: BALANCE / FADER / TREBLE / BASS /
SUBW LEVEL / LOUDNESS / DEFEAT /
GUIDE MIX LV*
Joystick
Adjusting the Balance
Adjusting the Fader
Setting the Treble Control
Setting item: FREQUENCY
Setting range:7.5kHz 10kHz 12.5kHz 15kHz
Setting the Bass Control
01GB00VPAB222R.book Page 11 Monday, January 23, 2006 4:24 AM