Alpine VPA-B222R Car Stereo System User Manual


 
47-EN
01GB06VPAB222R.fm
ALPINE VPA-B222R 68-02065Z87-A (EN)
Indication for iPod Mode
The iPod is not connected.
- Make sure the iPod is correctly connected.
Make sure the cable is not bent excessively.
The iPod’s battery remains low.
- Refer to the iPod’s documentation and charge the battery.
There are no songs in the iPod.
- Download songs to the iPod and connect to the VPA-B222R.
Communication error
- Turn the ignition key off, and then set to ACC or ON again.
- Check the display by reconnecting between the iPod and the
adapter, using the iPod cable.
Caused by the iPod Software Version not being compatible with
this unit.
- Update the iPod Software Version to be compatible with this
unit.
Specifications
FM TUNER SECTION
MW TUNER SECTION
LW TUNER SECTION
GENERAL
CHASSIS SIZE
Commander
Tuning Range 87.5 – 108.0 MHz
Mono Usable Sensitivity 9.3 dBf (0.8 µV/75 ohms)
50 dB Quieting Sensitivity 13.5 dBf (1.3 µV/75 ohms)
Alternate Channel Selectivity 80 dB
Signal-to-Noise Ratio 65 dB
Stereo Separation 35 dB
Capture Ratio 2.0 dB
Tuning Range 531 – 1,602 kHz
Sensitivity (IEC Standard) 25.1 µV/28 dB
Tuning Range 153 – 281 kHz
Sensitivity (IEC Standard) 31.6 µV/30 dB
Power Requirement 14.4 V DC
(11–16 V allowable)
Operating temperature +32 °F to +113 °F
(0 °C to + 45 °C)
Maximum Power Output 50 W × 4
Output Voltage 2,000 mV/10k ohms
Bass +20/–14 dB at 100 Hz
Treble ±14 dB at 10 kHz
Weight 1.2 kg
(2 lbs. 10 oz)
Audio output level
Preout (Front, Rear): 2V/10k ohms (max.)
Preout (Subwoofer): 2V/10k ohms (max.)
Auxout: 1.2V/10k ohms
Ai-NET: 850 mV
Width 275 mm (10-13/16")
Height 40 mm (1-9/16")
Depth 170 mm (6-3/4")
Width 53 mm (2-1/16")
Height 29 mm (1-1/8")
Depth 87 mm (3-7/16")
Weight 50 g (1.8 oz) (holder excluded)
01GB00VPAB222R.book Page 47 Monday, January 23, 2006 4:24 AM