Filter
Top Products
6
6. Install the rear mounting bracket (item 5 pg 2 )
in the O.E.M. dome light area. Align the front
mounting tabs with the openings in the metal
inner roof openings previously used to support
the rear pod retainers. Slide bracket to rear of
vehicle until flange contacts rear edge of
recessed area. See Figure 7.
7. Secure bracket to sheetmetal frame using four
(4) # 8 x 3/4" HWH TEKS screws ( item 1 pg
2 ). Secure O.E.M. ground wire (if applicable)
using one of the screws. See Figure 8.
FIGURE 7
FIGURE 8