Filter
Top Products
CD CHCD CH
CD CHCD CH
CD CH
AA
AA
A
NGER CONTRNGER CONTR
NGER CONTRNGER CONTR
NGER CONTR
OLOL
OLOL
OL
S / CD CHS / CD CH
S / CD CHS / CD CH
S / CD CH
AA
AA
A
NGER ERRNGER ERR
NGER ERRNGER ERR
NGER ERR
OR CODESOR CODES
OR CODESOR CODES
OR CODES
1414
1414
14
canceled by activating the Repeat or Random
Play function.
ds DISC/TRACK REPEAT PLAY (RPT)
When the RPT button is pressed, the RPT
indication will appear on the display panel
and play of the selected track will be
continually repeated until the Track Repeat
mode is canceled by pressing the RPT
button twice or by activating the Scan or
Random Play functions.
When the RPT button is pressed twice, the
DISC and RPT indications will appear on
the display panel and play of the selected
disc will be continually repeated until the
Disc Repeat mode is canceled by pressing
the RPT button again or by activating the
Scan or Random Play functions.
dt DISC/TRACK RANDOM PLAY (RND)
When the RND button is pressed, the RND
indication will appear on the display panel
and the tracks on the disc will be played in
a random, shuffled order. The Track Select
button will also select tracks in the shuffled
order instead of the normal progression. The
Random Track mode can be canceled by
pressing the RND button twice or by
activating the Scan or Repeat Play
functions.
When the RND button is pressed twice,
the DISC and RND indications will appear
on the display panel and the discs in the
magazine will be played in a random, shuffled
order, as well as the tracks on each disc.
After playing a track selected at random from
a disc in the magazine, the unit will select
another disc at random and play all the
tracks on it in a random shuffled order. This
will continue from disc-to-disc until the
Random Disc mode is canceled by pressing
the RND button again or by activating the
Scan or Repeat Play functions.
If a problem should develop while operating the CD changer, the following error codes may
appear on the display panel.
ER-1: Indicates that there is no magazine loaded in the CD changer.
ER-2: Indicates a problem with the magazine eject function.
ER-3: Indicates an error in the disc loading function.
ER-4: Indicates an error in the disc un-loading function.
ER-5: Indicates an error in the magazine position.
ER-6: Indicates an error in the laser pick-up position.
ER-7: Indicates an error in the laser focus on the disc.
In any of the above situations, try ejecting the CD magazine from the changer and make
sure the discs are clean, undamaged, and loaded correctly (refer to the Owner’s Manual
of the CD changer). Re-load the magazine and check for proper operation. You may also
try activating the RESET button cu on the unit, but this will also erase the time and pre-set
memories.
If the suggested measures do not solve the problem, contact an approved warranty station
near you for further assistance.
CD CHCD CH
CD CHCD CH
CD CH
AA
AA
A
NGER ERRNGER ERR
NGER ERRNGER ERR
NGER ERR
OR CODESOR CODES
OR CODESOR CODES
OR CODES