Filter
Top Products
9
CLOSING THE MONITOR
1. Hold the left and right upper side of the monitor and set the left and right angle of the
monitor parallel with the front of the unit as the picture above.
2. Press OPEN/CLOSE button or power button then the monitor will be closed.
1. Press the MENU button repeatedly on the radio or remote until the USER SELECT
menu is displayed.
2. Press the SEARCH UP/DOWN button to select TILT POSITION.
3. Press the VOLUME or button. Each time you press the VOLUME or button,
the monitor will slant forward or backward on step. This tilt position can be adjusted in 4
steps. For more information, see page 21 of owners manual.
NOTE
You can also adjust TILT position by pushing the TILT UP/DOWN button on the unit.
Each time you press the TILT UP/DOWN button, the monitor slants backward or forward
one step. The tilt position can be adjusted in 4 steps.
NOTE
1. If the left and right angle of the monitor is not parallel to the front of the unit, the monitor
cannot be closed.
2. If the OPEN/CLOSE button is pressed while radio or video is on, the monitor will be
closed. But the sound will stay on. Press the POWER button to turn the sound off.
ADJUSTING THE TILT POSION.