Filter
Top Products
17
CAMERA IN
SETTING THE CAMERA IN
1. Connect a back up camera video output to the AV1,2 or 3 video input terminals on the
rear of the unit.
* When the DVD changer is connected to AV3 video input, the rear view camera can be
connected only to AV1 or AV2 video input.
2. Press the MODE button to select radio mode.
3. Press the MENU button to select following picture.
4. Press the SEARCH UP/DOWN button to select CAMERA IN.
5. Press the VOLUME or button to select AV1,2 or 3 mode that rear view camera
is connected. Each time you press this button, AV input changes as
AV1 -> AV2 -> AV3 -> OFF
6. Press the CH or button to see either the normal display or 180reversed display.
WATCHING THE BACK VIEW PICTURE
When the vehicle is put in reverse, the monitor displays the back up camera picture.
WIRING CONNECTION
Connect orange color connection wire named REVERSE GEARto a switched power
output terminal of the R (reverse) gear. See page 26 : BASIC CONNECTIONS.
If AV input connected to the rear view camera is selected with the MODE
button, the monitor does not show the rear view camera picture. The
monitor shows only the WARNING picture.
NOTE