Filter
Top Products
128-6862A
4 of 16
-4-
ADJUST Volume buttons are used to select the desired beep
tone function. BEEP OFF indicates no beep tones. BEEP 2ND
indicates a tone will sound when a secondary function button is
pressed, such as BAND/LOUD, and BEEP ALL indicates a tone
will sound whenever a button is pressed.
44
44
4 BASS CONTROL
To adjust the bass level, first select the Bass mode by pressing
the SEL button 3 so that the BAS indication appears on the
display panel. Within 5 seconds of choosing the Bass mode,
press the AUDIO ADJUST VOL or button 2 to adjust the
bass response as desired. The bass level will be shown on the
display panel from a minimum of --10 to a maximum of 10 (00 is
flat response). The display will automatically return to the normal
indication 5 seconds after the last adjustment or when another
function is activated.
55
55
5 TREBLE CONTROL
To adjust the treble level, first select the Treble mode by pressing
the SEL button 3 so that the TRB indication appears on the
display panel. Within 5 seconds of choosing the Treble mode,
press the AUDIO ADJUST VOL or button 2 to adjust the
treble response as desired. The treble level will be shown on the
display panel from a minimum of --10 to a maximum of 10 (00 is
flat response). The display will automatically return to the normal
indication 5 seconds after the last adjustment or when another
function is activated.
66
66
6 LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first select the Balance
mode by pressing the SEL button 3 so that the BAL indication
appears on the display panel. Within 5 seconds of choosing the
Balance mode, press the AUDIO ADJUST VOL or button
2 to adjust the balance as desired. The balance position will be
shown on the display panel from BAL10L (full left) through BAL
10R (full right). When the volume level between the left and right
speakers is equal, BAL L=R will be shown on the display panel.
The display will automatically return to the normal indication 5
seconds after the last adjustment or when another function is
activated.
77
77
7 FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first select the Fader
mode by pressing the SEL button 3 so that the FAD indication
appears on the display panel. Within 5 seconds of choosing the
Fader mode, press the AUDIO ADJUST VOL or button 2
to adjust the front-rear speaker balance as desired. The fader
position will be shown on the display panel from FAD 10R (full
rear) through FAD 10F (full front). When the level between the
front and rear speakers is equal, FAD F=R will be shown on the
display panel. The display will automatically return to the normal
indication 5 seconds after the last adjustment or when another
function is activated.
88
88
8 LOUDNESS CONTOUR (LOUD)
When listening to music at low volume levels, this feature will
boost the bass and treble ranges to compensate for the charac-
teristics of human hearing. Press and hold the BAND/LOUD
button for 2 seconds to activate this feature and the indication
LOUD ON will appear on the display panel for 5 seconds. Press-
ing the button again for 2 seconds will deactivate the feature (LOUD
OFF indication will appear on the display panel for 5 seconds).