Filter
Top Products
128-6862A
5 of 16
-5-
99
99
9 AUDIO MUTE (MUTE)
This button is used to mute the volume from the system. By
pressing the button, a flashing MUTE indication will appear on
the display panel and the volume will be muted. Pressing the
MUTE button again, or any other panel button, will return the
volume level to the setting in use before the Mute function was
activated.
blbl
blbl
bl AM/FM BAND SELECTOR (BAND)
During radio operation, each momentary press of the BAND/LOUD
button will change the radio band. The indication AM, F1, F2, or
F3 will appear on the display panel according to your selection.
bmbm
bmbm
bm MANUAL/AUTOMATIC UP/DOWN TUNING (+ / -)
The radio tuning function is normally in automatic tuning mode.
The radio will tune to the next available station and stop at that
frequency when either button is pressed momentarily.
To tune rapidly in an upward or downward direction, press and
hold either button for at least 2 seconds. MANUAL will appear on
the display and the radio will tune through the entire band in an
up or down direction while the button is pressed. When the de-
sired radio frequency is reached, release the button; 5 seconds
later, AUTO will appear momentarily on the display.
bnbn
bnbn
bn AUTO-STORE TUNING (AS) PRE-SET SCAN TUNING (PS)
During radio operation, press this button momentarily to scan
the 6 stations pre-set into the memories of each FM band or the
AM band. The unit will stop at each preset station for 5 seconds
before continuing to the next pre-set station. During this time,
the preset station number (1-6) in the band will flash. Press the
button again momentarily to stop Pre-Set Scan operation and
remain on the selected frequency. The preset station number (1-
6) stops flashing.
Pressing the button for longer than 2 seconds will activate the
Auto-Store Tuning feature which will automatically scan each FM
band (or the AM band, if in use) and enter up to 6 strong stations
into the 6 preset memories of each band. After entering the
stations into the memories, the unit will automatically stop at
each station for 5 seconds so each can be heard. If you have
already set the pre-set memories to your favorite stations, acti-
vating the Auto-Store feature will erase those stations and enter
the new strong stations. This feature is most useful when travel-
ling in a new area where you are not familiar with the local sta-
tions. Momentarily press the button again to stop Auto-Store
operation and remain at the current station.
bobo
bobo
bo STATION PRE-SET MEMORIES
To set any of the 6 pre-set memories in each band, use the fol-
lowing procedure:
1. Turn the radio on and select the desired band.
2. Select the first station to be pre-set using the Manual/Auto
matic Tuning Controls bm.
3. Press the pre-set button (1-6) to be set and continue to
hold it in. After approximately 2 seconds the preset num-
ber will appear on the display panel, indicating that the