Filter
Top Products
15
4. Installing the Xpress XM Receiver into the Cradle
Install the Receiver as follows:
a. After making sure the connectors and guide pin hole are properly
lined up, gently lower the Xpress XM Receiver into the cradle
and press down on the Xpress XM Receiver to mate the
connectors together. The raised detent on the cradle will enter
the notch on the rear of the Receiver, indicating the Xpress XM
is properly seated.
b. The Xpress XM Receiver should now be secured in the
cradle
3. Using Other Manufacturer’s Mounts
The XMC10A Cradle can also be installed using other manufacturer’s
mounts; the mounting plate provisions on the rear and bottom of the
cradle provide you with two mounting options within the vehicle using
various vehicle-specific aftermarket brackets.
Setting Up and Installing Your Kit