Filter
Top Products
22
Be sure to choose a location carefully by taking notice of how
doors and trunks open and close, as well as how seats move
when they are adjusted so you can be certain there is ample
clearance provided for the cables.
Step 2.
Once you have plugged the power
and antenna jacks into the vehicle
cradle, secure the cables with tape
or wire ties to allow for a clean
appearance.For example, secure
the excess cable up under your
dash board, between the seat and
the console, or on the floor under a
seat or floor mat. This will help to
prevent the excess cable from
interfering with the everyday use of
your vehicle, improve the
appearance of the installation, and
avoid any undesirable accidental
damage to the cables that might
result in loss of power or satellite
signal.
Setting Up and Installing Your Kit