Filter
Top Products
17
5. Connection Options
The Xpress Receiver and Cradle provide an audio output signal
in three ways:
a. FM Modulator - When using the XMC10A cradle with the FM
modulator option, the XM audio signal can be received through
your vehicle’s radio on selectable FM frequencies using the
menu option included in your Xpress Receiver. (Refer to the
User Guide.) The XM audio signal can then be played through
your vehicle’s radio when that radio is tuned to one of the
available frequencies.
NOTE: To minimize radiated interference from the XM
equipment (antenna and receiver), it will be necessary to
incorporate the XM SureConnect Vehicle Installation
instructions provided in the XMC10A.
b. FM Direct Wiring - If the FM modulator does not provide
satisfactory performance in your vehicle, use the optional FM
Direct Adapter, Part # XMFM-1, which provides a hard wired FM
output.
c. Low-Level Audio Output - For vehicles equipped with radio head
units with auxiliary audio inputs, the audio signal can be routed
through an optional audio cable (Part No. SAT-RCA) and applied
to the auxiliary inputs of a radio or entertainment system. In this
case, it is best to turn the Xpress Receiver FM modulator option
off to avoid interference.
Setting Up and Installing Your Kit