Filter
Top Products
21
e. For option 2 and front mounting locations, route the cable
along the door jam and into the vehicle as shown. Route the
cable across the weather seal near the bottom of the door to
reduce water leaks.
c. Avoid kinking, crimping, twisting or chafing the cable. Use
pre-existing wire channels when possible.
d. For option 1 and rear mounting locations, route the cable into
the trunk as shown in the previous illustration. Always cross
the weather seal at the lowest part of the trunk to reduce water
leaks. From the trunk, route the cable into the passenger
compartment through available wire channels and then along
the floor under the door jam trim or under the carpet to the
front of the passenger compartment. Do not leave the cable
loose in the passenger compartment where it is likely to be
damaged.
Setting Up and Installing Your Kit