Behringer EPQ2000 Car Amplifier User Manual


 
24 EUROPOWER EPQ1200/EPQ2000
25
Quick Start Guide
Specications Especicaciones técnicas
EPQ1200 EPQ2000
Output Power
RMS
Stereo
8 Ω per channel, stereo 250 W 500 W
4 Ω per channel, stereo 425 W 700 W
Bridged Mono
8 Ω bridge mode 850 W 1400 W
Peak Power
Stereo
8 Ω per channel, stereo 320 W 600 W
4 Ω per channel, stereo 600 W 1000 W
Bridged Mono
8 Ω bridge mode 1200 W 2000 W
System
Controls
Front
Power switch
GAIN control (channels 1 and 2)
Power switch
GAIN control (channels 1 and 2)
Rear
CROSSOVER switch,
MODE switch, LIMITER switch
CROSSOVER switch,
MODE switch, LIMITER switch
Indicators
POWER Blue LED Blue LED
LIMIT (per channel) Blue LED Blue LED
SIGNAL (per channel) White LED (-20 dB, -10 dB,0 dB) White LED (-20 dB, -10 dB,0 dB)
Connectors
Inputs Balanced XLR, ¼" TRS , RCA Balanced XLR, ¼" TRS , RCA
Input impedance 10 kΩ unbalanced, 20 kΩ balanced 10 kΩ unbalanced, 20 kΩ balanced
Outputs
Touch-proof binding posts,
professional speaker connectors
Touch-proof binding posts,
professional speaker connectors
Output circuit type Class AB Class H, 2-tier
Distortion < 0.01% < 0.01%
Frequency Response 20 Hz - 20 kHz, +0/-1 dB 20 Hz - 20 kHz, +0/-1 dB
Damping Factor > 220 @ 8 Ω > 220 @ 8 Ω
Signal-to-Noise >100 dBA >100 dBA
Circuit protection
Cooling
Continuously variable speed fan
Back-to-front air ow
Continuously variable speed fan
Back-to-front air ow
Amplier protection
Full short-circuit, open-circuit, thermal,
and HF protection
Stable into reactive or mismatched loads
Full short-circuit, open-circuit, thermal,
and HF protection
Stable into reactive or mismatched loads
Load protection
On/o muting, DC-fault power
supply shutdown
On/o muting, DC-fault power
supply shutdown
Power supply / Voltage (Fuses)
USA / Canada 120 V~, 60 Hz (T 15 A H 250 V) 120 V~, 60 Hz (T 20 A H 250 V)
UK / Australia 220-240 V~, 50/60 Hz (T 8 A H 250 V) 220-240 V~, 50/60 Hz (T 10 A H 250 V)
Europe 220-240 V~, 50/60 Hz (T 8 A H 250 V) 220-240 V~, 50/60 Hz (T 10 A H 250 V)
Japan 100 V~, 50/60 Hz (T 15 A H 250 V) 100 V~, 50/60 Hz (T 20 A H 250 V)
Power consumption 1300 W 2200 W
Mains connector Standard IEC receptacle Standard IEC receptacle
Dimensions/Weight
Dimensions (H x W x D)
3.7 x 19.0 x 10.6"
94 x 483 x 269 mm
3.7 x 19.0 x 10.6"
94 x 483 x 269 mm
Weight 14.8 lbs / 6.7 kg 15.4 lbs / 7.0 kg
EPQ1200 EPQ2000
Potencia de Salida
RMS
Stereo
8 Ω por canal, stereo 250 W 500 W
4 Ω por canal, stereo 425 W 700 W
Puente mono
8 Ω modo de puente mono 850 W 1400 W
Peak Power
Stereo
8 Ω por canal, stereo 320 W 600 W
4 Ω por canal, stereo 600 W 1000 W
Puente mono
8 Ω modo de puente mono 1200 W 2000 W
Sistema
Controles
Panel frontal
Interruptor de encendido, control GAIN
(canales 1 y 2)
Interruptor de encendido, control GAIN
(canales 1 y 2)
Panel trasero
Interruptores CROSSOVER,
MODE y LIMITER
Interruptores CROSSOVER,
MODE y LIMITER
Indicadores
ENCENDIDO (POWER) Piloto azul Piloto azul
LIMITACIÓN (LIMIT por canal) Piloto azul Piloto azul
SEÑAL (SIGNAL - por canal) Piloto blanco (-20 dB, -10 dB,0 dB) Piloto blanco (-20 dB, -10 dB,0 dB)
Conectores
Entradas XLR balanceado, TRS de 6,3 mm, RCA XLR balanceado, TRS de 6,3 mm, RCA
Impedancia de entrada 10 kΩ no balanceado, 20 kΩ balanceado 10 kΩ no balanceado, 20 kΩ balanceado
Salidas
Bornes de seguridad,
conectores de altavoz profesionales
Bornes de seguridad,
conectores de altavoz profesionales
Tipo de circuito de salida Clase AB Clase H, 2 tier
Distorsión < 0.01% < 0.01%
Respuesta de frecuencia 20 Hz - 20 kHz, +0/-1 dB 20 Hz - 20 kHz, +0/-1 dB
Factor de amortiguación > 220 @ 8 Ω > 220 @ 8 Ω
Relación señal-ruido >100 dBA >100 dBA
Protección de circuitos
Refrigeración
Ventilador de velocidad variable
continuamente
Flujo de aire trasero-frontal
Ventilador de velocidad variable
continuamente
Flujo de aire trasero-frontal
Protección del amplicador
Protección contra cortocircuito total,
circuito abierto, térmico, y HF
Estable con cargas reactivas o desparejadas
Protección contra cortocircuito total,
circuito abierto, térmico, y HF
Estable con cargas reactivas o desparejadas
Protección contra sobrecargas
Anulación on/o, apagado en caso de
corte de corriente
Anulación on/o, apagado en caso de
corte de corriente
Alimentación / voltaje (fusibles)
EE.UU. / Canadá 120 V~, 60 Hz (T 15 A H 250 V) 120 V~, 60 Hz (T 20 A H 250 V)
Reino Unido / Australia 220-240 V~, 50/60 Hz (T 8 A H 250 V) 220-240 V~, 50/60 Hz (T 10 A H 250 V)
Europa 220-240 V~, 50/60 Hz (T 8 A H 250 V) 220-240 V~, 50/60 Hz (T 10 A H 250 V)
Japón 100 V~, 50/60 Hz (T 15 A H 250 V) 100 V~, 50/60 Hz (T 20 A H 250 V)
Consumo 1300 W 2200 W
Toma de corriente Receptáculo IEC standard Receptáculo IEC standard
Dimensiones/Peso
Dimensiones (A x L x P)
3.7 x 19.0 x 10.6"
94 x 483 x 269 mm
3.7 x 19.0 x 10.6"
94 x 483 x 269 mm
Peso 14.8 lbs / 6.7 kg 15.4 lbs / 7.0 kg