Filter
Top Products
Changing basic settings in the settings menu
111
Confi guring the preamplifi er out-
put for the subwoofer ( Subout)
If you want to use an additional
subwoofer, it can be adjusted to
the other loudspeakers.
You can adjust the level of the
Subout preamplifi er output in
13 increments from –6 dB (maxi-
mum decrease) to +6 dB (maxi-
mum increase) for one of the
following cut-off frequencies:
s80 Hz, 120 Hz, or 160 Hz.
Press the softkey
: in the
"Audio Settings" menu (next to
"Subout").
The "Subout" menu appears.
On the rocker switch
3,
press
or to select the de-
sired cut-off frequency.
On the rocker switch
3,
press
or to set the desired
level of the preamplifi er out-
put.
➔
➔
➔
02_BA_Memphis_EU_eng.indd Menü11102_BA_Memphis_EU_eng.indd Menü111 03.05.2006 10:44:10 Uhr03.05.2006 10:44:10 Uhr