Filter
Top Products
10
➮ Press OK.
➮ Press / to select the desired setting
from between
0
(no delay) and
90 min
.
➮ Press OK.
➮ Press SRC to exit the DSC menu.
Switching on the Radiophone
when the ignition is switched off
➮ Press ON.
The Radiophone will switch on.
To avoid running down the battery, the Ra-
diophone will switch off again automatically
after one hour.
Switching the Radiophone on
after the unit has been
disconnected from its power
supply
If the Radiophone has been disconnected
from the battery (e.g. when the vehicle is be-
ing repaired) and is reconnected, you will be
required to enter the security code in the ra-
dio pass the first time you switch it on again.
OPERATING THE RADIOPHONE
Basic functions
Selecting the audio mode
You can switch between radio, CD changer
operation and the operation of an auxiliary
audio source (if connected).
➮ Press SRC repeatedly until the functions
for the operating mode you want to se-
lect appear in the display.
Direct access to functions (PaX)
You can program the PaX button with one
function you use frequently for direct access.
Select one of the following functions:
● Radiotext
● Telephone number
● Mailbox
● Send SMS
● Network selection
● Call forwarding
● Telephone book
Note:
You can change the function you have se-
lected for the PaX button at any time.
Programming the PaX button
➮ Press and hold down the PaX button for
longer than one second.
The list of available functions will appear in
the display. If the PaX button has already been
programmed, the cursor will indicate the func-
tion currently selected.
➮ Press / to select the desired func-
tion.
➮ Press OK.
PaX program. finished
will appear in the dis-
play.
The main telephone menu will now appear in
the display. The PaX button is ready to use.
BASIC FUNCTIONS