Blaupunkt AntaresT60 Car Stereo System User Manual


 
28
Selecting the phone number from
the list of last numbers dialed
The last numbers you dialed will automati-
cally be stored on the SIM card. You can use
this list to place calls to these numbers.
While the Radiophone is in telephone
mode, press
briefly.
The list with the numbers dialed last will ap-
pear.
Use / to select the desired number.
Press .
The Radiophone will now dial this number.
Selecting the phone number from
the list of missed calls
Any calls you may have missed will be stored
in a list. You can use this list to place calls to
these numbers. These numbers will not be
stored unless the caller has activated call line
identification.
While the Radiophone is in telephone
mode, press briefly.
The list indicating the numbers of the calls
that have been missed will appear in the dis-
play. If the caller’s number has been stored
along with the name in the phone book, the
corresponding name will appear in the dis-
play.
Use / to select the desired entry.
Press .
The Radiophone will now dial this number.
Selecting the phone number from
the list of calls received
The calls you receive are also stored on a
list. You can use this list to place calls to these
numbers. These numbers will not be stored
unless the caller has activated call line identi-
fication.
While the Radiophone is in telephone
mode, press briefly.
The list indicating the numbers of the calls
that have been received will appear in the dis-
play. If the caller’s number has been stored
along with the name in the phone book, the
corresponding name will appear in the dis-
play.
Use / to select the desired entry.
Press .
The Radiophone will now dial this number.
Deleting an entry from the incoming/
outgoing call list
Select the desired list (incoming/outgo-
ing calls).
Use / to select the desired entry.
Press or .
Confirm the following query with OK.
Deleting the incoming/outgoing call list
Select the desired list (incoming/outgo-
ing calls).
Use / to select the corresponding
list (
Redial list
,
Rec’d calls
,
Calls
).
Press or
Confirm the following query with OK.
Answering a call
Incoming calls are indicated by the ringing
tone, the message
Accept?
in the display and
the display will change colour.
If you want to accept the call,
press or
pick up the handset receiver (if con-
nected).
Note:
It is possible to switch off the ringing tone. For
more information, refer to the section on “Set-
ting the ringing tone volume” in the chapter
on “Basic functions”.
USING THE TELEPHONE