Filter
Top Products
22
Important:
Be sure to memorise your PIN code and
do not reveal it to any unauthorised per-
sons.
When
ENTER PIN
appears in the display,
➮ enter your PIN number on the 0 - 9
keypad, beginning with the first digit.
➮ After you have entered the PIN code
completely, press OK or
#.
Note:
If you enter the PIN code incorrectly three
times in succession, the SIM card will be
locked. For more information, refer to the sec-
tion on “Unblocking the SIM card”.
Once the PIN code has been entered cor-
rectly and confirmed, the Radiophone will
switch on and the operating mode used last
(radio, CD changer or telephone) will be acti-
vated.
Switching the PIN code on/off
If your SIM card supports this function, it is
possible to switch the PIN inquiry on or off. If
the PIN inquiry is switched off, anyone can
use your SIM card and the Antares T 60 tel-
ephone. If the PIN inquiry is active, the valid
PIN must be entered each time you switch
the Radiophone on.
Note:
It is not possible to switch off the PIN inquiry
unless your SIM card supports this function.
➮ Press to switch to the telephone
mode.
➮ Press OK.
The DSC menu will appear in the display. The
cursor
will mark
Setup
.
➮ Press OK.
➮ Press as often as necessary until the
cursor
marks the menu item
PIN-
code
.
➮ Press OK.
➮ Press / to select the PIN code you
want to switch on or off (normally
PIN 1).
➮ Press OK.
A menu
PIN 1
containing all the functions
available will appear in the display.
➮ Press / to select the desired func-
tion
On
or
Off
.
➮ Press OK.
The PIN code must be entered to confirm this
change.
➮ Enter your PIN on the 0 - 9 keypad, be-
ginning with the first digit.
➮ Press OK.
Now the Radiophone will return to the origi-
nal
PIN 1
menu.
➮ Press CLR repeatedly until you return
to the main menu or press and hold
down CLR for longer than one second
to return to the DSC menu.
Changing the PIN code
➮ Access the
PIN 1
menu as described in
the section on “Switching the PIN code
on/off”.
➮ Press / to select the function
Change
.
➮ Press OK.
➮ Enter your old PIN on the 0 - 9 keypad,
beginning with the first digit.
➮ Press OK.
➮ Enter your new PIN on the 0 - 9 keypad,
beginning with the first digit
➮ and confirm the new number by enter-
ing it again.
➮ Press OK.
You will return to the
PIN 1
menu.
➮ Press CLR repeatedly until you return
to the main menu or press and hold
down CLR for longer than one second
to return to the DSC menu.
STARTING TELEPHONE OPERATION