Filter
Top Products
29
ENGLISH DEUTSCHFRANÇAISITALIANO
NEDERLANDS
SVENSKAESPAÑOL
PORTUGUÊS
Automatic answer
In the Setup menu, you can make a setting
so that all incoming calls are answered auto-
matically.
➮ In the telephone mode, press OK.
The DSC menu will appear. The cursor will
mark
Setup
.
➮ Press OK.
➮ Press to select
Auto. answer
.
➮ Press OK.
The
AUTOMATIC ANSWER
menu will ap-
pear in the display.
➮ Press to select the desired setting
On
or
Off
.
➮ Press OK.
You will return to the Setup menu.
Rejecting a call
If you do not want to answer a call,
➮ press CLR while the phone is ringing.
The caller will hear a busy signal.
Switching the microphone to
mute
During a call, you can switch the microphone
to mute.
➮ Press AUDIO.
Mute On
will appear in the display.
Switching off the mute function
➮ Press AUDIO again.
Mute Off
will appear briefly in the display.
Redial
You can have a number redialled from the list
of the numbers called last. For more informa-
tion, refer to the section on “Dialling telephone
numbers from the list of the last calls made”
in this chapter.
Automatic redial
In the Setup menu, you can make a setting
so that the number is redialled automatically
until the call goes through.
➮ In the telephone mode, press OK.
The DSC menu will appear. The cursor will
mark
Setup
.
➮ Press OK.
➮ Press to select
Auto. redial
.
➮ Press OK.
The
AUTOMATIC REDIAL
menu will appear
in the display.
➮ Press to select the desired setting
On
or
Off
.
➮ Press OK.
You will return to the Setup menu.
Ending the automatic redial function
➮ Once the dialling process has begun,
press to end automatic redial.
Call waiting (2nd call on hold)
During a telephone call, you can also accept
a second incoming call. The first caller will
then be put on “hold”.
Note:
It might be necessary to order “Call waiting”
service from your provider. Your service pro-
vider has more detailed information.
Answering the 2nd call
If you receive a second call while you are al-
ready using the telephone, you will hear a sig-
nal; if you want to answer the 2nd call,
➮ press OK.
The first caller will be put on “hold”.
Rejecting the 2nd call
➮ Press CLR.
The caller will hear a busy signal.
USING THE TELEPHONE