Filter
Top Products
21
Augsburg CR 24
DEUTSCH
ENGLISH
ITALIANO
PORTUGUES
NEDERLAND
ESPAGÑOL
SVENSKA
FRANÇAIS
Tape operation
Inserting the tape
• Turn the set on.
• Insert a cassette.
Insert cassette with side A or 1
facing up, the open side facing
to the right.
Eject
cassette
The cassette will be played in the direction
used last.
Ejecting the cassette
• Press .
The cassette will be ejected.
Fast tape run
Fast forward
• Press FF (fast forward).
At the end of the tape, the set will
switch to the other track and start play-
ing.
Stop fast forward
• Press FR.
Fast rewind
• Press FR (fast rewind).
When the tape has rewound to the be-
ginning, the set will switch to play the
same track again.
Stop fast rewind
• Press FF.
Side A or 1 Side B or 2
Track indication
Switch-over to the other track
Press simultaneously
Fast
forward;
To stop: press FR
Fast
rewind;
To stop: press FF
Adjusting the volume for traffic
messages and warning beep
The volume for traffic messages and warning
beep has been preset at the factory. Howe-
ver, you can adjust it to suit your
personal needs.
• Tune into a traffic station (“SK” lights up
in the display).
Switch on the priority for traffic messages:
• Press ARI.
• Turn down the volume.
Slightly pull out the (connected) set and care-
fully adjust the desired volume while a traffic
message is broadcast. Use an appropriate
screw driver with a maximum blade width of
3 mm.
ARI