Filter
Top Products
19
Augsburg CR 24
DEUTSCH
ENGLISH
ITALIANO
PORTUGUES
NEDERLAND
ESPAGÑOL
SVENSKA
FRANÇAIS
Sampling stations briefly
with Radio-Scan
Starting with the currently played station you
can sample the following ones one after
another for approximately 8 seconds each:
• Press knob 1 for approximately 1 sec-
ond.
As soon as the following station is
found, it will be sampled for approxima-
tely 8 seconds. The corresponding fre-
quency starts flashing in the display; if
this station has been already stored,
then the corresponding preset button
and memory bank will also light up in
the display. When the sampling period
has elapsed, the radio will start sam-
pling the next station.
To keep on listening to a sampled station:
• Press knob 1 once again.
The Scan function is off.
If no station is selected during the sampling
process, the set will start playing the station
from which the search operation has been
started before.
Note:
If you tune into a station which has already
been stored on another memory bank, the
corresponding preset button and the memo-
ry bank will start flashing on the display for
approximately 5 seconds.
Storing the strongest stations
automatically with Travelstore
In your respective reception area you can
automatically store the six strongest FM sta-
tions, sorted according to their frequencies.
This feature is particularly useful when you
are travelling.
• Press FM•T for at least 2 seconds.
The radio will search for the nearest FM
stations and store them in the memory bank
“T” (Travelstore). When the process has been
completed, the first station will be set.
If you wish, you can also store stations in the
Travelstore memory bank manually (see “Sto-
ring stations”).
Recalling stored stations
You can recall any stored station by pressing
the corresponding button.
• Select the memory bank.
For this, press FM•T until the desired
memory bank is indicated in the dis-
play.
• Briefly press the corresponding preset.
Sampling stored stations briefly
with Preset-Scan
You can briefly sample all stored stations of
a memory bank using the Preset-Scan func-
tion.
• Press PS,
the set will sample all stations of the
selected memory bank I, II, III or “T”
briefly one after another.
Free preset buttons will be skipped.
To stop this function:
• Press PS once again.
The radio will continue to play the cur-
rently sampled station.