Filter
Top Products
72
CEPTED” (i.e. the 23rd SIM card has
been trained).
The Radiophone can now be operated
using the new cards.
A maximum of two KeyCards and 30
SIM cards can be trained in this way.
If you attempt to program a third Key-
Card, the KeyCard which was not part
of the programming process will auto-
matically become invalid.
If 30 SIM cards have been pro-
grammed, it will be necessary to delete
old access authorizations before new
cards can be trained.
b) Training new cards after removing
the KeyCard or master SIM card
If this function is activated in the DSC
learn mode, it is possible to train an-
other SIM card each time the KeyCard/
master SIM card is removed. This
function is useful if you want to train
several cards one after the other (fleet
management).
c) Deleting SIM card authorisations
The authorisation for SIM cards can be
deleted using the CARD LIST in the
DSC menu. The master SIM card can
be deleted with a KeyCard only.
DSC learn mode
With this function you can select whether
you want to train additional SIM cards using
the DSC menu only or each time after re-
moving the KeyCard or the master SIM card
as well.
For operating instructions refer to “Program-
ming with DSC – LEARN MODE”.
Displaying the radio pass data
Using the KeyCard supplied with your set
you can have the radio pass data such as
the model name, product number (7 6...) and
serial number indicated in the display.
Please refer to the section on “Programming
with DSC – READ KEYCARD”.
Optical warning of anti-theft
protection
KeyCard tongue flashes
When the vehicle has been parked and the
KeyCard or SIM card removed, the KeyCard
tongue can be switched to flash to provide
additional anti-theft protection.
For this function to operate properly it is
necessary that the positive power supply line
and the permanent +12 V lead are connect-
ed as described in the installation instruc-
tions.
Be sure that “KEYCARD LED ON” has been
selected in the DSC mode.
If necessary, refer to the section on “Pro-
gramming with DSC – KEYCARD LED”.
Switching off the flashing light
The flashing light can be switched off by
pushing in the KeyCard tongue gently until
it locks.
If you would like to deactivate the flashing
tongue altogether, select the “KEYCARD
LED OFF” item in the DSC menu:
Care of your KeyCard/SIM-Card
In order to ensure that the card always func-
tions correctly, the contacts must be free of
any foreign particles. Avoid direct skin con-
tact.
Do not subject the cards to direct sunlight.
If necessary, clean the card contacts using
a cotton swab dipped in rubbing alcohol.