Filter
Top Products
E - 9
ManualTuning
Hold& pressthe Up Tuning or DownTuningbuttonto movethe radio frequencynumber up
ordownonestep.
AutoSeekTuning
PresstheUpTuningorDownTuningbuttontomovetonextstationautomatically.
9. TUNER OPERATION
RecallaStation
Selectaband(ifneeded).Pressapresetbutton toselectthecorrespondingstoredstation.
14) TUNING UP/DOWN BUTTON ( )
11) PRESET STATIONS BUTTONS
Six numbered preset buttons store and recall stations for each band.
Store a Station
Select a band (if needed), then select a station. Hold a preset button for 3 seconds. The
presetnumberwillappearinthedisplay.
AutomaticallyStore
Automaticallyselect6strongstationsandstoretheminthecurrentband.Selectaband(if
needed). Press AS button for more than three seconds. The new stations replace stations
alreadystoredinthatband.
PresetScan
Scanstationsstoredinthecurrentband. Selectaband(ifneeded).PressAS buttonforless
than3 seconds. The unit will pause forten seconds at each preset station. PressAS button
againtostopscanningwhenthedesiredstationisreached.
STEREO
The unit will automatically pick up a stereo signal, when available. When in stereo mode,
the ST icon appears in the display. When no stereo signal is available, the unit will
automaticallyreverttomonooperation,andnoiconwillbedisplayed.
9) AUTOMATICALLY STORE / PRESET SCAN (AS)
8) BAND BUTTON (BROWSE/BAND)
PressBROWSE/BANDbutton tochangebetweenFMbandsandAM(MW)
7) LOCAL / DISTANCE SELECTOR
ShortpresstheLO/DXbuttontoselectbetween LocalorDistant model.Thisfeatureis used
todesignate thestrength of thesignals atwhich theradio will stopduring automatictuning.
"Distance" is the default, allowingthe radioto stopat abroader rangeof signals.To setthe
unit to select only strong local stations during automatic tuning, press this button until
"Local"appearsinthedisplay.