Filter
Top Products
280-7452-00
ADX5655z 11
Radio Operations
Turning on/off the loudness
The loudness effect emphasizes the bass and
treble to create a natural sound tone. When you
are listening to music at a low volume, it is rec-
ommended to use the loudness effect.
1. Press and hold LOUD button ( for 1 second
or longer to turn on the loudness effect. When
the loudness effect is turned on, “LOUD” lights
in the display.
2. Press and hold LOUD button ( for 1 second
or longer to turn off the loudness effect.
“LOUD” goes off in the display.
Basic Operations
FM reception
For enhanced FM performance the
®
tuner includes signal actuated
stereo control and Multipath noise reduction cir-
cuits.
Changing the reception area
This unit is initially set to USA frequency intervals
of 10kHz for AM and 200kHz for FM. When using it
outside the USA, the frequency reception range
can be switched to the intervals below.
● Setting the reception area
1. Press FUNC button 7 and select the radio
mode (FM or AM).
2. While pressing RDM button 8, each time you
press and hold the number “1” of the Preset
buttons 1 for 2 seconds or longer, the recep-
tion area switches from inside the USA to out-
side the USA or from outside the USA to in-
side the USA.
∗ Any station preset memories are lost when the
reception area is changed.
Listening to the radio
1. Press FUNC button 7 and select the radio
mode.
2. Press BAND button ! and select the radio
band. Each time the button is pressed, the
radio reception band changes in the following
order:
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...
3. Press Right button ¥ or Left button % to tune
in the desired station.
Tuning
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.
Seek tuning
1. Press BAND button ! and select the desired
band (FM or AM).
∗ If “MANU” is lit in the display, press and hold
BAND button ! for 1 second or longer. “MANU”
in the display goes off and seek tuning is now
available.
2. Press Right button ¥ or Left button % to au-
tomatically seek to the next station.
When Right button ¥ is pressed, the station
is sought in the direction of higher frequencies;
if Left button % is pressed, the station is
sought in the direction of lower frequencies.