Filter
Top Products
Basic Operations
14
DFZ675MC
English
Adjusting the treble (Gain,
Frequency)
This adjustment can be performed when the DZE
is set to “DZE-OFF”.
1. Press the [A-M] button and select
“TREBLE”.
2. Turn the [ROTARY] knob clockwise to
emphasize the treble; turning it
counterclockwise attenuates the treble.
* The factory default setting is “T<GAIN 0>”
(Adjustment range: –6 to +6).
3. Press the [R] or [F] button to select
“T<FREQ 12k>”.
Turn the [ROTARY] knob and select the
frequency.
* The factory default setting is “T<FREQ 12k>”
(Adjustment options: 8 kHz/12 kHz).
4. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the balance
1. Press the [A-M] button and select
“BALANCE”.
2. Turn the [ROTARY] knob clockwise to
emphasize the sound from the right speaker;
turning it counterclockwise emphasizes the
sound from the left speaker.
* The factory default setting is “BAL 0”
(Adjustment range: L13 to R13).
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the fader
1. Press the [A-M] button and select “FADER”.
2. Turn the [ROTARY] knob clockwise to
emphasize the sound from the front speakers;
turning it counterclockwise emphasizes the
sound from the rear speakers.
* The factory default setting is “FADER 0”
(Adjustment range: F12 to R12).
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Setting the button illumination
1. Press the [COLOR] button to select a color
type.
2. Each time you press the [COLOR] button, the
type changes in the following order:
“COLOR SCAN” ➜ “Indigo Blue” ➜ “Surf Blue”
➜ “Silky White” ➜ “Aqua Green” ➜ “Fresh
Green” ➜ “Leaf Green” ➜ “Warm Amber” ➜
“Passion Red” ➜ “Vivid Pink” ➜ “Pale Pink” ➜
“Dark Violet” ➜ “Pure Purple” ➜ “USER 1” ➜
“USER 2” ➜ “USER 3” ➜ “COLOR SCAN”...
●Setting COLOR SCAN mode
As selecting “COLOR SCAN”, the color
automatically changes.
* The factory default setting is “COLOR SCAN”.
* After 3 second the color changes to the other.
●Setting USER mode
As selecting “USER”, press and hold the
[COLOR] button for 1 second or longer, “R>8
G>8 B>8” appears in the display.
* The factory default setting is “R>8 G>8 B>8”.
1. Press the [R] or [F] button to move the
cursor.
2. Turn the [ROTARY] knob and select from 0 to
8.
3. Press and hold the [h] button for 2 seconds
or longer to store the color in memory and
cancel setting mode.
COLOR R G B
Indigo Blue 0 0 8
Surf Blue 0 4 8
Silky White 8 8 7
Aqua Green 0 8 2
Fresh Green 0 8 0
Leaf Green 3 8 0
Warm Amber 8 3 0
Passion Red 8 0 0
Vivid Pink 8 0 3
Pale Pink 8 2 3
Dark Violet 3 0 8
Pure Purple 6 0 8
USER 1 8 8 8
USER 2 8 8 8
USER 3 8 8 8