Filter
Top Products
32 DXZ955MC
280-8036-00
English
Sound Adjustment
No.
Function Name
Description
1 FLAT
Sound source flat
equalizing
2 BASS BOOST Bass tones enhanced
3 HIGH BOOST
Mid and treble
enhanced
4 IMPACT
Low and treble
enhanced
5 ACOUSTICAL
Mid tones (human
voice) enhanced
6 USER User preference
Adjusting bass/treble
The bass/treble mode can be adjusted only
when the “SPEAKER SELECT” is set to “3
WAY”, “2 WAY”, or “NORMAL” (cf. page 14) and
“EQ SELECT” is set to “BASS/TREB” (cf. page
43).
• The factory default setting is “0”.
1. Press the [SOUND] button.
2. Touch [BASS] or [TREBLE].
BASS
RTN
0
3. Touch
on the right of the display and
adjust the item as desired.
∗ This item can be adjusted within the range
-6 to +6.
4. Press the [SOUND] button to return to the
original mode.
Adjusting balance/fader
BALANCE:
Adjusts the volume balance between the left
and right speakers.
FADER:
Adjusts the volume balance between the front
and rear speakers.
• The factory default setting for BALANCE is
“0” and for FADER is “0”.
1. Press the [SOUND] button.
2. Touch [BALANCE] or [FADER].
BALANCE
RTN
0
3. Touch
on the right of the display and
adjust the item as desired.
∗ “BALANCE” can be adjusted within the
range L13 (left side emphasized) and R13
(right side emphasized).
∗ “FADER” can be adjusted within the range
R12 (rear side emphasized) and F12 (front
side emphasized).
4. Press the [SOUND] button to return to the
original mode.
Selecting the VSE menu
VSE (Virtual Space Enhancer) allows you to
compensate the sound pressure balance inside
your car so that the same sound effect can be
obtained whichever seat you are sitting in as
proved in compensation simulations.
• The factory default settings are “OFF” for VSE
and “FLAT” for the VSE basic menu.
■ VSE basic menu
Six basic menus are pre-stored to this function.
Select the basic menu to suit your preference.
1. Press the [SOUND] button.
2. Touch [VSE].
P.EQ FILTER
RTN
OFF OFF OFF 0 0
SOUND
ADF VSE
SW
VOLUME
BALANCE
1 2
3. Touch [ON/OFF].
The VSE effect is toggled ON/OFF.
VSE MODE
RTN
FLAT
OFF
ON/OFF
PRESET
P 1
PRESET
When VSE is set to “OFF”, the VSE setting
is not reflected on the music source. This
completes the VSE setting. Press the
[SOUND] button to return to the original
mode.
4. Touch
on the right of the display and
select one of the VSE basic menus.
VSE basic menus
5. Press the [SOUND] button to return to the
original mode.
+DXZ955MC_01-27-Eng.p65 05.1.17, 5:16 PM32